Shape-Controlled Synthesis of Cu3TeO6 Nanoparticles with Photocatalytic Features.

Cu3TeO6 (CTO) has been synthesized by hydrothermal synthesis applying different pH values without any template or a calcination step to control the crystalline phase and the morphology of nanoparticles. The physicochemical properties characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, N2 adsorption, X-ray photoelectron spectroscopy, and diffuse reflectance ultraviolet-visible (DRUV-vis) spectroscopy techniques revealed that the pH values significantly influence the crystal growth. In acidic media (pH = 2), crystal growth has not been achieved. At pH = 4, the yield is low (10%), and the CTO presents irregular morphology. At pH = 6, the yield increases (up to 71%) obtaining an agglomeration of nanoparticles into spherical morphology. At basic conditions (pH = 8), the yield increases up to 90% and the morphology is the same as the sample obtained at pH = 6. At high basic conditions (pH = 10), the yield is similar (92%), although the morphology changes totally to dispersed nanoparticles. Importantly, the as-prepared CTO semiconductor presents photocatalytic activity for H2 production using triethanolamine as a sacrificial agent under visible light illumination. The results also revealed that the nanoparticles agglomerated in a spherical morphology with larger surface area presented almost double activities in H2 production compared to heterogeneously sized particles. These results highlight the suitable optoelectronic properties, including optical band gap, energy levels, and photoconductivity of CTO semiconductors for their use in photocatalytic H2 production.

Cs3Bi2Br9/g-C3N4 Direct Z-Scheme Heterojunction for Enhanced Photocatalytic Reduction of CO2 to CO.

Lead-free halide perovskite derivative Cs3Bi2Br9 has recently been found to possess optoelectronic properties suitable for photocatalytic CO2 reduction reactions to CO. However, further work needs to be performed to boost charge separation for improving the overall efficiency of the photocatalyst. This report demonstrates the synthesis of a hybrid inorganic/organic heterojunction between Cs3Bi2Br9 and g-C3N4 at different ratios, achieved by growing Cs3Bi2Br9 crystals on the surface of g-C3N4 using a straightforward antisolvent crystallization method. The synthesized powders showed enhanced gas-phase photocatalytic CO2 reduction in the absence of hole scavengers of 14.22 (±1.24) µmol CO g-1 h-1 with 40 wt % Cs3Bi2Br9 compared with 1.89 (±0.72) and 5.58 (±0.14) µmol CO g-1 h-1 for pure g-C3N4 and Cs3Bi2Br9, respectively. Photoelectrochemical measurements also showed enhanced photocurrent in the 40 wt % Cs3Bi2Br9 composite, demonstrating enhanced charge separation. In addition, stability tests demonstrated structural stability upon the formation of a heterojunction, even after 15 h of illumination. Band structure alignment and selective metal deposition studies indicated the formation of a direct Z-scheme heterojunction between the two semiconductors, which boosted charge separation. These findings support the potential of hybrid organic/inorganic g-C3N4/Cs3Bi2Br9 Z-scheme photocatalyst for enhanced CO2 photocatalytic activity and improved stability.

Scalable All-Inorganic Halide Perovskite Photoanodes with >100 h Operational Stability Containing Earth-Abundant Materials.

The application of halide perovskites in the photoelectrochemical generation of solar fuels and feedstocks is hindered by the instability of perovskites in aqueous electrolytes and the use of expensive electrode and catalyst materials, particularly in photoanodes driving kinetically slow water oxidation. Here, solely earth-abundant materials are incorporated to fabricate a CsPbBr3 -based photoanode that reaches a low onset potential of +0.4 VRHE and 8 mA cm-2 photocurrent density at +1.23 VRHE for water oxidation, close to the radiative efficiency limit of CsPbBr3 . This photoanode retains 100% of its stabilized photocurrent density for more than 100 h of operation by replacing once the inexpensive graphite sheet upon signs of deterioration. The improved performance is due to an efficiently electrodeposited NiFeOOH catalyst on a protective self-adhesive graphite sheet, and enhanced charge transfer achieved by phase engineering of CsPbBr3 . Devices with >1 cm2 area, and low-temperature processing demonstrate the potential for low capital cost, stable, and scalable perovskite photoanodes.

A Review on Halide Perovskite-Based Photocatalysts: Key Factors and Challenges.

A growing number of research articles have been published on the use of halide perovskite materials for photocatalytic reactions. These articles extend these materials' great success from solar cells to photocatalytic technologies such as hydrogen production, CO2 reduction, dye degradation, and organic synthesis. In the present review article, we first describe the background theory of photocatalysis, followed by a description on the properties of halide perovskites and their development for photocatalysis. We highlight key intrinsic factors influencing their photocatalytic performance, such as stability, electronic band structure, and sorption properties. We also discuss and shed light on key considerations and challenges for their development in photocatalysis, such as those related to reaction conditions, reactor design, presence of degradable organic species, and characterization, especially for CO2 photocatalytic reduction. This review on halide perovskite photocatalysts will provide a better understanding for their rational design and development and contribute to their scientific and technological adoption in the wide field of photocatalytic solar devices.

Silver-Decorated TiO2 Inverse Opal Structure for Visible Light-Induced Photocatalytic Degradation of Organic Pollutants and Hydrogen Evolution.

TiO2 inverse opal (TIO) structures were prepared by the conventional wet chemical method, resulting in well-formed structures for photocatalytic activity. The obtained structures were functionalized with liquid flame spray-deposited silver nanoparticles (AgNPs). The nanocomposites of TIO and AgNPs were extensively characterized by various spectroscopies such as UV, Raman, X-ray diffraction, energy-dispersive spectroscopy, and X-ray photoelectron spectroscopy combined with microscopic methods such as scanning electron microscopy, transmission electron microscopy (TEM), and high-resolution TEM. The characterization confirmed that high-quality heterostructures had been fabricated with evenly and uniformly distributed AgNPs. Fabrication of anatase TiO2 was confirmed, and formation of AgNPs was verified with surface plasmon resonant properties. The photocatalytic activity results measured in the gas phase showed that deposition of AgNPs increases photocatalytic activity both under UVA and visible light excitation; moreover, enhanced hydrogen evolution was demonstrated under visible light.

Multilayer TiO2 Inverse Opal with Gold Nanoparticles for Enhanced Photocatalytic Activity.

Three-dimensional highly ordered multilayer titanium dioxide (TiO2) inverse opal (TIO) structures with two pore sizes were fabricated over a large surface using a self-convective method. The fabricated TIO multilayers were functionalized with gold nanoparticles (AuNPs) by immersing the samples in solution with gold nanoparticles. The photocatalytic activity of TiO2 was enhanced by 85% via plasmonic activation of AuNPs that increased the lifetime of photogenerated holes and electrons. The improved photocatalytic activity was characterized with both UVA and visible light irradiation using an in-house built gas-phase photoreactor.